Sale!

Galvanized Chimney Cap- Homesaver

$74.50$115.00

Lifetime Warranty on Workmanship and Materials

3 Year Warranty on Rust Through

Screen Height: 8 inches  Screen Size: 3/4 inch mesh

18 gauge base and mesh and 24 gauge Lid

You Must use the chart below to properly size your cap before purchase.

Description

When you are looking for quality but the budget says “No”, The Homesaver Galvanized chimney cap is the solution to your problem. These high quality single flue caps are heavily built with 18 Gauge galvanized steel for the base and 3/4 inch mesh. The lid is 24 gauge galvanized steel. The lid features picture frame embossing as well as a shallow channel for added strength.

These caps are made to sit on a single clay flue liner, attaching to it with 4 gripping bolts which thread through welded base nuts in the 18 gauge base plate. For this to work, at least 1 inch of the clay flue liner must extend above the chimney crown. Each cap is sized to fit specific outside liner dimensions so be sure to choose the correct cap for your flue size.

This Homesaver Galvanized Chimney Cap is everything you could want in a cap. The gripping bolts in the solid base will provide a solid attachment to the chimney tile to make sure that your cap withstands heavy winds.. The 3/4″ mesh will keep animals, birds, and debris from entering your chimney while at the same time acting as a spark arrestor in the case of a chimney fire. The sleek lid will keep weather and debris from entering your flue and can even help eliminate those nasty wind induced down drafts

Homesaver Galvanized Chimney Cap Warranty

All Homesaver Galvanized single flue chimney caps come with a Lifetime Warranty on Workmanship and Materials, and a three year Warranty on Rust Through.

How To Choose the Right Size Homesaver Single Flue Galvanized Chimney Cap

Each cap is sized to fit specific outside liner dimensions so be sure to choose the correct cap for your flue size. Sizing your cap is easy. Simply measure the outside width and length of the clay flue liner and match to the chart below.

Cap Size Fits Outside Flue Dimensions
8″ x 8″ 6 1/2″ x 6 1/2″ to 9″ x 9″
8″ x 13″ 6 1/2″ x 11 1/2″ to 9″ x 14″
8″ x 17″ 6 1/2″ x 16 1/2″ to 9″ x 19″
12″ x 12″ 10 1/2″ x 10 1/2″ to 13″ x 13″
13″ x 13″ 11 1/2″ x 11 1/2″ to 14″ x 14″
13″ x 17″ 11 1/2″ x 16 1/2″ to 14″ x 19″
17″ x 17″ 16 1/2″ x 16 1/2″ to 19″ x 19″

 

Installation

Installation is easy! Simply loosen the gripping bolts and set the cap onto the flue you want to cover. Once it is in place, simply tighten the bolts against the flue liner. Within minutes your cap will be installed and adding to the aesthetics and safety of your home.

Additional information

Cap Size

8" x 8", 8" x 13", 8" x 17", 12" x 12", 13" x 13", 13" x 17", 17" x 17"

Reviews

There are no reviews yet.

Be the first to review “Galvanized Chimney Cap- Homesaver”